ecoSmart Works is your leading Wood Flooring supplier in Bali and on this page we provide you with some insights related to flooring installation, renovation and maintenance.

Nevertheless, some of our clients are preferring alternatives to wood flooring and we are offering a range of high quality LVT, SPC and other flooring options.

Different to solid or engineered wood the installation and maintenance requirements will differ.

For some clients we also provide only the installation service when they already purchased the flooring material themselves, but still want to ensure a professional installation service.

Green Village sanding and finishing of bamboo flooring with Tung Oil (after finishing)

Flooring Installation

ecoSmart Works your leading Wood flooring supplier in Bali

When looking at wooden floors we always have to ensure that they are suitable for the surrounding environment. No matter what timber species we choose they can all be effected by humidity and moisture, termite and wood bugs and the wear and traffic they are exposed to.

A wooden floor should be a lifetime investment, which also means the wood has to be treated, prepared and processed professionally and it has to be installed properly with the most suitable method given the project conditions.

After installation the most appropriate finishing needs to be applied depending on environmental exposure, wear and traffic.

Ongoing proper maintenance, from general cleaning to periodical deep cleaning and freshen-up or re-polishing are key for long lasting performance and durability of your wooden floors.

Therefore we only work with selected flooring manufacturer partners who understand our requirements, can ensure the correct moisture content and precise grooving of the flooring boards as well as pre-treatment for wood parasites and termites.

In any project the flooring boards should be on site at least three weeks prior to installation, so the wood can acclimatize with the site conditions, which will avoid problems later on.

We prefer unfinished flooring, as every project has different requirements and it much easier to adjust and ensure quality results when finishing on site.

For the installation itself we require a smooth, leveled and waterproofed concrete floor, so we can glue the flooring directly onto the concrete using our BONA R848 saline adhesive. In many cases we require foam sheets or our BONA 580 moisture barriers due to the inappropriate preparation by the concrete contractor, but this varies from project to project, as our main aim is to ensure a long lasting quality job.

We also use joists either due to the required floor height needs to be increased or in cases where we feel that there is a high risk of moisture from concrete or the concrete is not level or smooth enough.

When using joists we use galvanized screws to fit them to the concrete and we than use our PrimatechNailer and Fasteners to fit the flooring boards to the joists. For durability we recommend reclaimed Ulin joists.

For the finishing we use our BONA Belt, Flexisand and Edge Sander for a smooth and even floor surface before applying the finish of choice. Depending on the performance requirements and also the look and feel our clients can choose from a wide range of stains and colors, tones and either an oil or water based coating finish.


Padma Hotel Legian Mockup Room using BONA Mega Gloss Finish (after finishing)

Flooring Renovation

ecoSmart Works your leading Wood Flooring supplier in Bali

Here it really depends on the damage of the floors to see if they can be repaired or have to be replaced. Glued down floors are often difficult to remove or will endure a lot of breakage, so we really need to first assess the site to recommend the best solution.

In some cases we were able to remove the flooring and fix the concrete or sub-floor and re-install the existing flooring with minor replacements, but certainly sanding and re-finishing will be required in order to have a professional look and feel.

In case of heavy damage such as rot or termites it might be best to remove the whole flooring, treat the concrete or sub-floor to protect against termites or moisture same as when we do new installations and than install new flooring.

If the damage is only on the surface, such as scratches or cracks and splitting we can use our BONA Mix & Fill after sanding down to the raw timber and then re-sand to a smooth surface and apply your choice of finishing, oil or water based.

Decking Bisma8

Flooring Maintenance

ecoSmart Works your leading Wood Flooring supplier in Bali

Some of our clients choose an oil based finish, which really enhances the grain of the timber, especially using reclaimed or a rustic surface, so they often ask us to provide a re-finishing service every 6 months for their flooring.

We also offer a Deep Cleaning Scrubbing service as a general maintenance that depending on traffic should be considered every 4-6 months and for water based floors we also use Freshen-Up or Polish Matt/Gloss to bring out the shine of the original coating that might have become a bit dull.

Tell Us About Your Project

Yes Please
Yes Please